Flashing Guide OLD

Revision as of 16:45, 25 April 2018 by Dguidi (talk | contribs)

Revision as of 16:45, 25 April 2018 by Dguidi (talk | contribs)

Contents

Introduction

This document will guide you through the necessary steps needed to flash your Gemini with Linux or Android OS.

Please note: Flashing Android or Linux will delete any user data on the device. Please make sure you have a backup of any important data before starting!

Important Note: please don’t use other tools to install Linux on a Gemini as it’s easy to loose key information such as IMEI. In particular, never use the “Format all + download“ option in the SP Flash Tool as this erases key information stored in the NVRAM partition and can lead to a non-functional device.


Download and Install FlashTool on Windows

 The first step is to install the flash tool drivers. These drivers are needed for your Windows PC to communicate with your Gemini.

You can find the drivers here: Windows Flash Tool Drivers

Once downloaded, unzip the archive. You will find a folder called FlashToolDrivers, open the folder and double click on the Install file. Allow the installation to complete by clicking Yes when asked to make changes.

Now that the drivers have been installed, we can download the Windows flash tool:  Windows Flash Tool

You will also need a firmware to flash, either Linux or Android. You can find the available Gemini firmwares here: Gemini Firmware

Once downloaded please unzip both the flash tool and the firmware. Next, run the flash tool by double clicking on flash_tool in the FlashToolWindows folder. Use the choose button as in the following screenshot to load the scatter file that you will find inside the downloaded firmware.


Download and Install FlashTool on Linux

You can find the Linux flash tool software here: Linux Flash Tool

You will need a 64 bit Linux machine and you might need root access to run it. The executable file is flash_tool.sh. If you get a BROM error when connecting the Gemini (see flash_tool console log) then you should follow this guide https://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802/page16 - specifically the 2 points regarding udev rules.


Configuring Flash Tool

Use the choose button as in the following screenshot to load the scatter file that you will find inside the downloaded firmware. In particular:

  • Downlad-Agent should be set to the file MTK_AllInOne_DA.bin, which is located in the FlashToolWindows or FlashToolLinux folder.
  • Scatter-loading file should be set to the specific scatter file of the firmware that you want to flash, which is located in the firmware folder


flash1.png



Backup the NVRAM partition

Before flashing the device with a different firmware it is a good idea to backup the current NVRAM partition. This partition stores key information for your Gemini, including the IMEI number. If it gets lost or damaged, your Gemini will not be able to take or receive calls.


The provided flash tool is already configured for your Gemini. To create a backup of your NVRAM partition, just click on the Readback tab and then on the Add button. A row will appear in the table as in the following screenshot.


nvram.png 


Next, just click the Read Back button, connect your Gemini to your PC and restart the Gemini. Once rebooted, the flash tool will detect the phone and will write the NVRAM partition on a file on your hard disk called NVRAM0. It’s a good idea to keep this file as a backup.


Flashing the Gemini with an alternative firmware

Be sure to follow the previous step to store a copy of the NVRAM partition as backup. Now, run the Flash tool software and click on the Download tab. Next, locate the Scatter-loading File option and click on the associated choose button, as highlighted in the picture below:


  flash1.png


Now, open the firmware folder from the firmware zip file you downloaded and select the scatter file. The table should be populated as below:


flash2.png


 Finally, change the Download Only drop down menu to Firmware Upgrade and click on the Download button. Connect your Gemini and restart it. . Once rebooted, the flash tool will detect the phone and it will update the OS with the selected firmware.


Linux dual boot notes

The dual boot mechanism works as follow:

  • If you restart your Gemini normally (i.e. no special key is pressed), then Android will start.
  • To start in recovery mode, keep pressed the Esc (On) key until the screen turns ON.
  • To boot Linux, keep pressed the side button key until the screen turns ON.