Changes

Android Flashing Guide

2,002 bytes added, 12:18, 20 June 2018
no edit summary
If you choose to flash a standard Android firmware, you will have to download one from this page: [[Gemini Firmware|Gemini Firmware.]]
After downloading the firmware, unzip it to reveal the folder containing the firmware code, for example '''Gemini_WIFI_MP_09052018''' or '''Gemini_x27_FOTA3_12062018'''and proceed to the next section.
If you choose to flash a dual boot Linux or Android-Linux firmware, then follow this link you will have to get repartition your device, reserving some space for Linux and some for Android. To repartition your Gemini you will have to use our partition tool, available at [http://support.planetcom.co.uk/partitionTool.html http://support.planetcom.co.uk/partitionTool.html]. A screenshot of the Gemini partitionertool is provided below.
[[File:Screen_Shot_2018-06-20_at_11.06.06.png|640x422px|center|border]]
 
You can choose the partition size for Linux and Android by dragging the planet slider left or right. You can choose to have an Android-only Gemini, a multi boot Linux-Android or a Linux-only Gemini. Once you have selected the partition sizes you have to select your Gemini model using the appropriate drop down menu.
 
There are 3 Gemini versions, please make sure you select the right version for your device. WiFi-Only Gemini users should select "Gemini WIFI-Only". 4G Gemini users using x25 chip (early release Geminis) should select "Gemini x25" and finally Gemini 4G x27 users should select the "Gemini x27" option. If you are not sure about your Gemini version, just check under Settings -> Wireless & networks. If you see a menu called SIM cards, then you have an x27 Gemini, otherwise you have an x25 Gemini.
 
After selecting the partition size, you can select the operating systems to use for each boot mode. Gemini supports 4 boot modes. When the Gemini is OFF, press Esc(On) key for around one second to initiate the booting process. Immeditately after that, the unit will vibrate, and after a few seconds the screen will turn ON. When the screen turns ON, the Gemini will check the status of the Esc (On) key and of the side silver button. Based on the status of those buttons there are 4 possible booting modes:
 
* Boot 1: Both Esc (On) key and side button are not pressed. This is the default booting option when no buttons are pressed.
* Recovery Mode: Esc (On) is pressed. This will always boot into overy mode.
* Boot 2: Side button is pressed.
* Boot 3: Esc(On) key is pressed and Side button is also pressed