Changes

Linux Flashing Guide

1 byte removed, 14:44, 12 February 2019
Configuring Flash Tool
Use the choose button as in the following screenshot to load the scatter file that you will find inside the downloaded firmware. In particular:
* DownladDownload-Agent should be set to the file MTK_AllInOne_DA.bin, which is located in the FlashToolWindows or FlashToolLinux folder.
* Scatter-loading file should be set to the specific scatter file of the firmware that you customised, which is located in the firmware folder
In particular, all the partitions should be checked. If you see any unchecked partitions in the list, make sure you unzipped the Linux module in the firmware folder and try again.
 
 
==Backup the NVRAM partition==