862
edits
Changes
m
Dguidi moved page Configuration to ConfigurationOld without leaving a redirect
* '''Android-only firmware'''
** Press Esc (On) for a few seconds around one second to turn ON the unit and boot into Android.** Press Esc (On) for around one second to turn ON the unit and at the same time press and hold the side button and keep pressed both buttons until the screen turns ON to boot in recovery mode. At this stage the recovery mode is disabled and you will see a droid image with a red triangle and a "No command" text.
* '''Dual boot Android-Linux firmware'''
** Press Esc (On) for a few seconds around one second to turn ON the unit and boot into Android. You should release the Esc (On) button before the screen turns ON, otherwise the unit will boot into recovery mode (see below).** Press Esc (On) for around one second to turn ON the unit and side button at the same time press and hold the side button until the screen turns ON to boot into Linux. You should release the Esc (On) button before the screen turns ON, but you must keep the side button pressed until you see the turning ON. When the screen turns ON you can release the side button, and the unit will boot into Linux.
** Press Esc (On) and keep pressing the button until the screen turns ON to boot in recovery mode. At this stage the recovery mode is disabled and you will see a droid image with a red triangle and a "No command" text.
<br data-attributes="%20/">To force a restart if the unit is stuck in recovery mode or in fastboot mode keep pressed the Esc (On) key button for about 20 seconds until you feel the gemini vibrate and booting.
==<span id="Connecting_Gemini_to_a_PC_for_file_transfer" class="mw-headline">Connecting Gemini to a PC for file transfer</span>==