View source for Cosmo Firmware upgrade

Cosmo Communicator has 2 processors, one running Android and the other supporting the cover display. There are 2 firmware upgrade processes required to update your Cosmo.

=====Upgrading Android firmware=====
The latest Android firmware should be detected automatically by your Cosmo if connected to a network. To proceed with the installation, run the Settings application and select System.

[[File:Screenshot_20191211-105808.png|center|border]]


Inside System, navigate to Wireless update.

[[File:Screenshot_20191211-105759.png|center|border]]

The Wireless Update app will allow you to check for an update and to proceed with the download and installation in case an update is found.


[[File:Screenshot_20191211-105749.png|center|border]]

=====<br />Updating the Cover Display firmware=====
Once the Android firmware is updated, it is recommended to update the companion Cover Display firmware. To do this, navigate and run the Cover Display Assistant app.


[[File:Screenshot_20191129-095021.png|center|border]]


Inside Cover Display Assistant, tap on the 'Check for updates' button to detect a firmware update and follow the on-screen instructions.


[[File:Screenshot_20191129-095002.png|center|border]]


In case you experience failures flashing using the Cover Display Assistant, please try restarting the unit and flashing with 'Aeroplane mode' ON and 'Do not disturb' ON.


[[File:Screenshot_20191211-112152.png|center|640x320px|border]]


Please make sure you restart your Cosmo after the 2 files have been flashed.