Changes

** This is the new method used to boot different operating system systems on the Gemini - see [http://support.planetcom.co.uk/partitionTool.html http://support.planetcom.co.uk/partitionTool.html].** There are 4 com** Press When the Gemini is OFF, press Esc (On) key for around one second to turn ON initiate the booting process. Immeditately after that, the unit will vibrate, and boot into Androidafter a few seconds the screen will turn ON. You should release the Esc (On) button before When the screen turns ON, otherwise the unit Gemini will boot into recovery mode check the status of the Esc (see belowOn)key and of the side silver button.Based on the status of those buttons there are 4 possible booting modes: ** Press Boot 1:  Both Esc (On) for around one second to turn ON the unit and at the same time press key and hold the side button until are not pressed. This is the screen turns ON to boot into Linuxdefault booting option when no buttons are pressed. You should release the ** Recovery Mode:  Esc (On) button before the screen turns ON, but you must keep the side button is pressed until you see the turning ON. When the screen turns ON you can release the side button, and the unit This will always boot into Linuxovery mode.** Boot 2: Side button is pressed.** Press Boot 3: Esc (On) key is pressed and keep pressing the Side button until is also pressed Using the screen turns ON tool available at [http://support.planetcom.co.uk/partitionTool.html http://support.planetcom.co.uk/partitionTool.html] you can customise what operating system to run when a specific boot in recovery mode. At this stage the recovery mode is disabled and you will see a droid image with a red triangle and a "No command" textselected.