Changes

# Run the Gemini keyboard application and select the "Configure " option. <br /><br />[[File:Config-US-S1-1-C.png|center|640x320px|border]]# Tap on "Select your preferred language " and select your language. Optionally, you can remove any other language. Your screen should look like the following<br /><br />[[File:Config-US-S1-8-C.png|center|640x320px|border]]# Tap the back button to go back to the configurator<br /><br />[[File:Screenshot_20180504-153431.png|center|640x320px|border]]# Now tap on "Enable Gemini Keyboard". From the list that will popup you should choose the Gemini keyboard option. We strongly recommend to deselect all the other methods, as having multiple method enabled can easily confuse users. Your screen should look like the following<br />[[File:Screenshot_20180504-153440.png|center|640x320px|border]]# Tap the back button to go back to the configurator<br /><br />[[File:Config-US-S3-1-C.png|center|640x320px|border]]# Tap on "Switch input method " and select the Gemini Keybord input method. You should see only one method here. If you see multiple methods, start this process again and make sure you remove the other methods as explained in point 4.<br /><br />[[File:Screenshot_20180504-153449.png|center|640x320px|border]]# Tap the back button to go back to the configurator<br /><br />[[File:Config-US-S4-1-C.png|center|640x320px|border]]# Finally tap on Configure your keyboard layout to select the appropriate layout. Please make sure  that you select a "Gemini Keyboard" and not an "Android Keyboard", otherwise some keys will not work as expected. See the first option in the following screenshot<br /><br />[[File:Screenshot_20180504-1535182.png|center|640x320px|border]]

** Press Esc (On) for a few seconds around one second to turn ON the unit and boot into Android.** Press Esc (On) for around one second to turn ON the unit and at the same time press and hold the side button and keep pressed both buttons until the screen turns ON to boot in recovery mode. At this stage the recovery mode is disabled and you will see a droid image with a red triangle and a "No command" text.

** Press Esc (On) for a few seconds around one second to turn ON the unit and boot into Android. You should release the Esc (On) button before the screen turns ON, otherwise the unit will boot into recovery mode (see below).** Press Esc (On) for around one second to turn ON the unit and side button at the same time press and hold the side button until the screen turns ON to boot into Linux. You should release the Esc (On) button before the screen turns ON, but you must keep the side button pressed until you see the turning ON. When the screen turns ON you can release the side button, and the unit will boot into Linux.